DOWNLOAD · EARLY ACCESS 0.7.2 · OCTOBER 21, 2026

Get Spark Chamber

Spark Chamber is free during Early Access and needs no account. It saves your progress on your device and lets you export it to a file at any time from Settings → Export progress. The Linux app also keeps automatic backups.

Join the beta to help test 0.7 until December 6, 2026.

Linux

SNAP

Spark Chamber is built and tested on Ubuntu. It installs from the Snap Store and updates automatically, on PCs and on 64-bit ARM.

Get it from the Snap Store

Planned

macOS · coming soon
iPhone and iPad · coming soon
Android · coming soon
Windows · coming soon

Install on Linux

  1. Open the Snap Store page and click Install, or run this command in a terminal:
  2. Open Spark Chamber from your apps.
  3. Updates install automatically.
sudo snap install spark-chamber

Snap comes with Ubuntu. On other Linux distributions, install snapd first.

Before you start

  • This is Early Access, so expect rough edges. More topics are on the way.
  • Updates keep your progress, and the Linux app keeps automatic backups. In the browser, Export progress is your backup. To move your progress to another computer, use Settings → Export progress and Import progress.
  • Found a wrong answer or a bug? Use the Report a problem button in the app.
  • Hands-on builds use only battery or USB power, at 12 V or less. Read the safety notes before you build.

Release notes

0.7.2October 21, 2026
  • The scope leaves no ghost, catches a comparator's fast switching, keeps running after Autoset, and its readings hold their digits still and update three times as often.
  • Settings opens from anywhere with Ctrl+comma or the gear and puts you back where you were. Listening on: Speakers or Headphones; the ambience plays quieter.
  • On a big window the docked scope takes half the window and scrolling no longer turns its knobs; on a touchpad, pinch zooms and two fingers pan the Bench.
  • Simulations are exact at any time step, no longer ring where a diode cuts off a coil's current, and read rectifier ripple right.
  • Circuits started from rest always run, Copy for LTspice copies the same circuit, and the breadboard refuses a dead short.
  • Every analysis is checked against ngspice, an independent circuit simulator.

A 0.7.1 save opens in 0.7.2 with nothing lost, set to Listening on: Speakers; choose Headphones in Settings for the drone as it was.

Known limits:

  • On Linux the app draws at most 60 frames a second, even on a faster screen: the toolkit's Linux version caps it. The browser version follows the screen's rate in Chrome and Firefox.
  • Sound has not been tried in Safari.
  • The arm64 snap is built from the same code as the PC one but hasn't been tried on ARM hardware yet.
  • Autoset and the scope's capture are slower on circuits that mix a slow and a fast signal: the buck converter's Autoset, and then its first trace, each take about 2.4 times as long as in 0.7.1, with no progress shown while they run.
  • Three simulator readings are still a little off against ngspice or the exact answer: the flyback preset's drain ring, and two slow-pulse lab readings in their fourth digit. They are fixed first in 0.7.3.
  • Two rarer circuits, in no preset or lab, are known to go wrong: a capacitor of a few farads between two 10 MΩ resistors reads about 1 % off, and a circuit whose capacitor starts charged to 5 V across a diode can stop with "did not converge". Both are fixed in 0.7.3.
0.7.1October 18, 2026
  • The scope, the Bench, the calculator and every panel answer a click or key at once, even with the scope running.
  • The scope's trace is smooth instead of stair-stepped, and its readouts hold still instead of resizing as values change.
  • A scope prediction is judged only against what the screen shows: a clipped trace first asks you to turn VOLTS/DIV up or press AUTOSET.
  • The calculator has four display looks to choose from in Settings, and its glass no longer has a glare.
  • The low drone now plays across the app, the Workshop and the circuit simulator have an ambience of their own, and the music can keep playing while the window is minimized.

A 0.7.0 save opens in 0.7.1 with nothing lost.

0.7.0October 16, 2026
  • The Workshop is rebuilt: the circuit fills the window, tools sit on a rail with their keys, Run (F5) is one amber key, and the multimeter stays in view.
  • Build on a clear 830-point breadboard: put each lead in a hole, run jumpers, and the schematic redraws from what you built.
  • A new game starts on First light's Bench: predict the LED's current, close the loop, measure it, and see the map when the design clears.
  • The oscilloscope trace is live: every sweep is a fresh 8-bit capture with realistic noise.
  • The calculator is laid out like the scope, and its Complex line and Matrix cells type upright.
  • The Theory map has a low drone and a swell when a topic lights, with Music and Effects volume and Mute in Settings.

A 0.6.2 save opens in 0.7.0 with nothing lost. Once 0.7.0 has written a save, 0.6.2 and earlier leave it alone.

Known limits:

  • Wiring the Bench needs a window at least about 900 px wide. In a narrower one a new game goes straight to choosing a study path.
  • At about 900 × 700 the cleared report is tall enough to cover part of the drawing; it scrolls.
  • A design's spec panel fills in its readings after Run, before you have taken them with the meter. A later 0.7 update will ask for your own reading.
  • 41 problem types have no Bench for now: their drawings do not yet carry the values the problems state.
  • The Schmitt-trigger problem whose op amp is drawn with only its supply rails stops its scope run early, at about 38.5 µs.
  • In full screen (F11) on some Linux desktops, the screen can stop updating after you enter practice; pressing F11 twice brings it back.
  • Sound has not been tried in Safari.
  • The arm64 snap is built from the same code as the PC one but hasn't been tried on ARM hardware yet.
  • There is no macOS version yet.
0.6.2October 12, 2026
  • The Bench oscilloscope is now a full front panel: glowing traces, volts and time per division knobs with printed scales, AC/GND/DC switches, trigger level, mode and slope, Run/Stop, Single and Autoset.
  • MEASURE reads Vpp, Vmax, Vavg, Vrms, frequency and the phase and lag between the two channels; CURSOR gives Δt, 1/Δt and ΔV.
  • The scope behaves like one on a real bench: its probes load the circuit, AC coupling is a real high-pass, and a ×10 probe needs compensating.
  • The ground clip is tied to earth, so clipping it to a node that isn't ground shorts that node, as it would on a real bench.
  • The snap is also built for 64-bit ARM Linux.

A 0.6.1 save opens in 0.6.2 with nothing lost.

Known limits:

  • At some window sizes (around 1000 × 760) the Bench's instrument panel can run out of room; a larger window or EXPAND shows all of it.
  • The Schmitt-trigger op-amp circuit's scope run stops early, at about 38.5 µs.
  • In full screen (F11) on some Linux desktops, the screen can stop updating after you enter practice; pressing F11 twice brings it back.
  • The arm64 snap is built from the same code as the PC one but hasn't been tried on ARM hardware yet.
  • On a few problems, such as the RC filter's gain in decibels, the Bench opens the circuit with fixed part values instead of the problem's own, so the scope's readings there don't match the problem's answer.
0.6.1October 9, 2026
  • Practice keeps one steady layout: the circuit stays whole and in place, with Formulas on the left and the calculator on the right.
  • The keyboard works throughout: Enter after a set, keys 1–4 in the final test, typing after the calculator closes, and Page Up and Page Down to scroll.
  • The upright calculator is easier to type in: exponents end where you expect, operators stay in their box, and there's a new ×10ⁿ key.
  • Loops and nodes counts nodes one per line and says what an ideal supply does.
  • Several wrong answers and false statements in problems are fixed.
0.6.0October 6, 2026
  • Ten new topics: loops and nodes, node-voltage and mesh-current analysis, superposition, dependent sources, RL time constants, switching transients, second-order circuits, clampers and voltage doublers, and small signals on a biased diode.
  • Solutions show their working as typeset math, one step per line.
  • The calculator line is upright: fractions stack, powers rise and roots grow as you type (Settings switches back to a flat line).
  • The calculator gains Matrix and Complex modes.
  • Drift problems show the conductor's cut face and cross-section.
  • Formula sheets never clip.
  • Two missed reviews leave a topic lit and marked shaky instead of dark; one good review steadies it.
  • The problem you left open stays until you answer it.
  • F11 full screen in the Linux app.

A 0.5.2 save opens in 0.6.0 with nothing lost.

0.5.2October 5, 2026
  • Theory shows each topic as a small drawing of its part or plot; its name appears when you hover over it or reach it with the keyboard.
  • Theory highlights your path's goal subjects and marks your next few topics.
  • The progress readout on Theory counts by subject: Core, Circuit analysis and Electronics.
  • Phones and narrow windows get the Theory map too, with pinch to zoom and tap to open.
  • The title screen greets you at every launch, with Continue first.
  • The calculator knows meters, coulombs and joules, and asks when a bare m could mean meters or milli.
  • In the final test, Formulas and the calculator open beside the problem, as in practice.
  • Esc closes the Esc menu reliably, wherever the keyboard focus is.
0.5.1October 4, 2026
  • Theory opens on your next topics at full size, with the whole core in view for a new student.
  • Press 0 for the whole map; press it again to return to your next topics.
  • A selected topic stays readable beside its card, at any window size.
  • Esc returns to Theory from a problem or Progress opened there.
  • Tab reaches the next topic on Theory, and Enter or Space opens it.
0.5.0October 4, 2026
  • A new look. Filament, in warm graphite and amber, is the default; Obsidian, Solder mask and Blueprint are in Settings, each in light and dark.
  • A title screen, then a choice of path: Electrical engineer or Maker. The other paths show the subject that opens them.
  • A clearer Theory map: the basics at the center, one area for each subject, and a selected topic shows everything it builds on.
  • Units can be typed the way you write them, such as 5 khz, 4.7 kohm or 12 volts, with unit buttons under the calculator.
  • Shift+Enter uses the calculator's result as your answer, and the calculator shows fractions and powers upright as you type them.
  • A missed problem comes back later with new values.
  • Estimates show the working: each number rounded to one figure and a power of ten.
  • Key terms appear in their subject's color, and conventional current is explained before it is used.
  • Report a problem: nothing leaves your device until you press Send on the form.
0.4.1October 3, 2026
  • Report a problem opens the report form in your browser, already filled in. The report is filed only when you press Send, and no account is needed.
0.4.0October 3, 2026
  • A design map: each location is a real circuit to design, build, and measure on the Bench, checked against its specification. Clearing one reveals the next.
  • The Workshop is a tree rooted at the Bench, with labs you run on the Bench step by step.
  • Terminology: the key terms on boards by subject, with the main ones on pages of their own.
  • A final test of three problems before a topic lights.
  • A better placement test, with an “I don't know” button, fairer scoring, and a retake from Theory or Settings.
  • Circuits on the Bench are kept with your progress, and you can save any circuit as a blueprint.
  • A browser version at app.sparkchamber.app, with Export and Import to move your progress between it and the app.
  • Faster Theory and Workshop maps.

Known limits: Workshop terms don't add tools to the Bench yet, and blueprints can't be placed into map locations yet. Full screen (F11) comes in the next version.